Changing Water

The frequency at which you should change your water is specific to the amount of use. If you have a Chiller and are running it every day, we recommend changing your water every 2-3 weeks. If you do not have a chiller, we recommend changing your water every 3 days to avoid algae buildup in your tub (slimy film).

Below are recommended steps to quickly and effectively change the water in your tub:

Step 1: Preparing for Water Change

• Gather Supplies: Have a hose for refilling and a suitable method for draining the water, such as a submersible pump or a drain hose.

Step 2: Draining the Tub

• Disconnect Electric Devices: If using a chiller, power off the unit and unplug from the electrical socket. 
• Drain Outlet: Disconnect the quick connect hose from the input of your Chiller (If you have one) and allow water to flow out of your Tub. 

Step 3: Cleaning the Tub

• Remove Debris: If necessary, Clear out any visible debris, leaves, or dirt.
• Cleaning Solution: Use a mild, non-abrasive cleaner and a soft cloth or sponge. Avoid harsh chemicals that could cause skin irritation or damage to the Tub material. 
• Rinse Thoroughly: After cleaning, rinse the tub thoroughly to remove any soap residue.

Step 4: Refilling the Tub

• Check for Leaks: Before refilling, ensure there are no leaks in the tub.
• Refill with Clean Water: Follow the same process as the initial Tub fill with fresh, clean water. Fill it to the recommended level.

Step 5: Reconnecting Electrical Devices

• Chiller Reconnection: Once the tub is refilled, reconnect the chiller and any other devices. Ensure all connections are secure and safe, and the Chiller is working properly.