The Chillax Chiller Unit is able to display temperatures in both Celsius and Fahrenheit. Sometimes during quality assurance testing, the unit is set to Celsius as opposed to Fahrenheit to ensure software quality. If your unit is in Celsius and you would prefer reading the temperature in Fahrenheit, please see the below steps. These steps are the same if you would also prefer to change your unit from Fahrenheit to Celsius.
- Step 1: Hold the "Set" button on the console for 6 seconds until you see the blinking "E1" displayed. This brings you to the system settings.
- Step 2: Press the "Down Arrow" button to cycle through the system settings. Each press will cycle through options sequentially, from "E2", "E3", "E4", "E5", "CF", "C2", and then back to "E1". When you hit "CF" Stop - this is the temperature setting.
- Step 3: Press the "Set" button to enter the temperature change mode.
- Step 4: Press the "Down Arrow" button once to change the setting from Celsius to Fahrenheit, or vice versa. After 6 seconds, the unit will return to normal operating mode and save your selected setting.
Comments
0 comments
Article is closed for comments.